Dear all,

I am currently unable to measure on my 2012 KK, so I hope someone here can help me out with a quick answer. I am getting ready to order stainless steel brake lines for my KK per http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=81956&hilit=Brake+lines.

However, I also want to upgrade my front lines. Does anybody know the standard length of the OEM front brake lines? I will most likely go with 18" in for the rear. I am wondering if I should simply order 18" for the front as well or if they will be way too long (OME lift; 2.5").

Thanks in advance.

-Oban

_________________
2012 Jeep Liberty KK, 4x4, Mopar Hitch, Hood Lift Strut Mod, OME Lift, Bilstein Shocks, 245/75R16 AT3's

They the same for the KJ vs KK?

Sent from my SM-N900P using Tapatalk

_________________
I am the G.O.A.T.

Don't know for sure. The part number for the KK left front brake hose is 52125333AB. It only lists the 2008 to 2012 KK as applicable vehicles. Thus, not sure if the KJ is the same length.

_________________
2012 Jeep Liberty KK, 4x4, Mopar Hitch, Hood Lift Strut Mod, OME Lift, Bilstein Shocks, 245/75R16 AT3's

Unless you do a cradle drop, extension for the fronts aint needed. If you feel froggy, add 2" to it.

Sent from my SM-N900P using Tapatalk

_________________
I am the G.O.A.T.

I know that no extension is needed. I still want to go to braided steel lines. My issue is that i am currently physically apart from the KK, so i can't measure. I am looking for the overall length if the OEM lines.

_________________
2012 Jeep Liberty KK, 4x4, Mopar Hitch, Hood Lift Strut Mod, OME Lift, Bilstein Shocks, 245/75R16 AT3's