I don't know about all THAT but this family life isn't for the faint of heart. Got one graduating this year and another starting high school this fall. We have three vehicles that don't get the attention they need and a house that doesn't always cooperate with my schedule. I don't get a lot of time to myself lately but I'm pretty sure I can get away for a day trip, maybe even an overnighter, I'm due.

_________________
2010 KK Deep Water Blue,OME Liftplus 1",JBA 5.5 UCA ,Dynaflow cat back exhaust, Weathertech VV & mats,Mopar skids,Atthehelm front bumper, Smittybilt XRC 10, Rigid LED's,RL Skink Supersliders,Gecko Safari Basket Detroit Truetrac rear, E-Locker front, G2, Dana 4.10's

Id be down for a trip down here, provided i can find the time with wedding planning and work and school.... Now if its in the summer, thats a whole differe t story i should be able to swing darn near anything


Sent from my iPhone using Tapatalk

_________________
06 KJ sport 926/948s Mopar/Boiler Skids, trimmed front bumper with detours backbone, (in possession of or soon: custom RL Super skink sliders (tommudd) and JBA upper Arms)

Possibly selling my set of custom length rock rails made for Troys KJ ( tjkj2002) back when it was IFS. I bought them from him when he went SFA.
These go full length where as the rest RL produced were a bit shorter.
Some trimming of the lower flare is required

NO SHIPPING, they are long and heavy
Meet within reason or go further if you chip in some coin for gas
pictures from when I first installed them, no changes just need sanded and repainted
NEW price if he is still making them is 435, and then you'll wait
My price 375, but these you can have today, not waiting

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Bolt to the "frame" and thepinch weld? Would you bewilling to help install?


Sent from my iPhone using Tapatalk

_________________
06 KJ sport 926/948s Mopar/Boiler Skids, trimmed front bumper with detours backbone, (in possession of or soon: custom RL Super skink sliders (tommudd) and JBA upper Arms)

Yes bolts to the frame and the pinch weld , 7 in the pinch I think per side and 3-6 in the frame
Willing to install.....dang, driving a hard bargain, how do I always get shanghaied into installing the used parts I sell?
You pay for new bolts, pizza , and I'll help OH and a couple of drill bits
Mounting these takes the bite of a new bit

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Ok! You take paypal? That way you can say they sold and we will set up a day i can come up from athens and get them! Send me a list of what bolts, bits, and your favorite pizza and we'll call it done!


Sent from my iPhone using Tapatalk

_________________
06 KJ sport 926/948s Mopar/Boiler Skids, trimmed front bumper with detours backbone, (in possession of or soon: custom RL Super skink sliders (tommudd) and JBA upper Arms)

I'd kinda like to watch the master install these myself....

_________________
________
06 Renegade, 265-70-16 Duratracs on Moab's/OMF, RL sliders ,roof rack, On board air, JBA-UCA, adjust-a strut, Rear-OME 948 two uppers ,Sensatrac shocks, Boiler rad. skid, Mopar/4x guard skid,Terra-flex 4:1,HD cooling,more lights, gauges. ARB/Warn, Mudds Rear Bumper.

Oooo sounds like we may have a little meet and greet brewing?


Sent from my iPhone using Tapatalk

_________________
06 KJ sport 926/948s Mopar/Boiler Skids, trimmed front bumper with detours backbone, (in possession of or soon: custom RL Super skink sliders (tommudd) and JBA upper Arms)

Anyone want to check out phionex offroad park in ne ohio this weekend?

_________________
Jeepless again.

Wheeling an Isuzu Rodeo on 1 tons
and a Stock Chevy Tracker

send you info in a little while for Paypal

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Ok tom sounds good


Sent from my iPhone using Tapatalk

_________________
06 KJ sport 926/948s Mopar/Boiler Skids, trimmed front bumper with detours backbone, (in possession of or soon: custom RL Super skink sliders (tommudd) and JBA upper Arms)

I do but my daughter just had her tonsils taken out yesterday and I have strange noises coming from the front end of my jeep..again

_________________
2010 KK Deep Water Blue,OME Liftplus 1",JBA 5.5 UCA ,Dynaflow cat back exhaust, Weathertech VV & mats,Mopar skids,Atthehelm front bumper, Smittybilt XRC 10, Rigid LED's,RL Skink Supersliders,Gecko Safari Basket Detroit Truetrac rear, E-Locker front, G2, Dana 4.10's

Dammit! Id love to but ill be in hocking hills with all my boys for my bachelor party


Sent from my iPhone using Tapatalk

_________________
06 KJ sport 926/948s Mopar/Boiler Skids, trimmed front bumper with detours backbone, (in possession of or soon: custom RL Super skink sliders (tommudd) and JBA upper Arms)

Hey tom!
I happen to be making an impromtu run up to columbus on friday to pick up a buddy from the airport for my bachelor party. Wont have time to install but i could take them off your hands. I found the install guide online from rock lizard and can install them myself. Just a thought if youre interested.

_________________
06 KJ sport 926/948s Mopar/Boiler Skids, trimmed front bumper with detours backbone, (in possession of or soon: custom RL Super skink sliders (tommudd) and JBA upper Arms)

I was just talking to Tom, his wife has his computer tied up. He says he'll be there Friday from 10 - 5:30 and to bring Cash.

_________________
2003/3.7 SOLD

2007 Wrangler - traded

2010 Wrangler Rubicon

Yes as John stated I'll be here just let me know what time
Did I read where you said you were getting JBA UCA's ??
Have you bought them yet?

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Pm me your address and paypal. probably will be in right around 1030? Buddy lands at 10 at portcolumbus. I am putting jba uca's in but no i have not bought them yet.

_________________
06 KJ sport 926/948s Mopar/Boiler Skids, trimmed front bumper with detours backbone, (in possession of or soon: custom RL Super skink sliders (tommudd) and JBA upper Arms)

No more rims but did dig out an early 1900's Yale that was made in Toledo back in the day

Well thats cool then !!

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Had a LOST FAMILY member stop by today for some ah well upgrades
Great to see Bob after what seems like 5 years ! LOL
Had a great time, although next time maybe I'll just stand back and let him do the work, bad habit of just jumping in and getting done what needs done !

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited