Does anyone know where I could rent timing belt tools for crd at a reasonable price.
or anyone have a set to sell or rent reasonable. ID Parts want $100. which i think is steep. I have a Jeep Liberty CRD which just turned 100K. I am Don from Huntingdon, Pa. I am new to this website. I would really appreciate any help anyone could give me. Don

Not that hard to make the cam pins, see http://www.beesvillebeefarm.com/jeep.html and my pin dimension post viewtopic.php?f=98&t=72201) a 6mm or 1/4" long shaft allen key works for flywheel pin (see 05 FSM for how to) and you can probably pickup a VW cam holder tool pretty cheap.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

Are you just trying to do a timing belt job? or is it something else.

_________________
05 CRD Limited GDE Hot Tune, EuroTC, ARPs, Full EGR Del, IDParts Hoses, Etecno 7v GP, OME 790 Bilstein 916front, OME948 OME N132Lrear, JBA A-Arms, 245/75/16 Duratracs+Moabs, Renegade roof lights, Curt Front Hitch, BTF Kryptonite Diff, JCR Stage2 Rails, SkidRow Skids, HDS Tstat,

Sold 06 CRD Limited K&N, EHM, ORM, EuroTC, TransgoKit, Samcos

Weeks101 user has rentals. https://shop.sasquatchparts.com

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.

Yes, I am installing a new timing belt and water pump.

idParts has a good TB/WP kit. Remember on the WP all you have to replace is the front half and the "O" ring; back half has no moving parts and is a pain to remove.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

These are cheap, but you get what you pay for: caveat emptor

https://www.amazon.com/Generic-Diesel-E ... belt+tools

https://www.amazon.com/Setting-Diesel-E ... belt+tools

_________________
"Gunner": 2007 Jeep Grand Cherokee Limited CRD GDE ECO tune Bought 01Apr16 (71K miles)


If you're in New England and need your KJ TB done, PM me.

Retired:
Tractor: Dark Khaki '06 CRD Sport, GDE ECO & Trans Tunes, 2.5" lift + 245/75r16. - Sold 27Apr16
Ghost: Silver '06 KJ CRD Limited, bunch of goodies done - Sold 18Apr16

You might get one timing job from those cheap pins. Good, fast, cheap. Choose one.


Sent from my iPad using Tapatalk HD

_________________
Proud supporting vendor of LOST Jeeps
TRAVELING CRD TECH. I come to you!
Need help? Just ask! I've taken it apart more than most.
Email jeep [at] maincomputer [dot] com - BOARD MESSAGING IS BROKEN
Over 225 CRDs currently driving with my valves, timing belt, rockers, or ARP Studs.
Bad noises = REALLY bad things.

Like I'd said and misspelled: caveat emptor

a.k.a.: let the buyer beware

_________________
"Gunner": 2007 Jeep Grand Cherokee Limited CRD GDE ECO tune Bought 01Apr16 (71K miles)


If you're in New England and need your KJ TB done, PM me.

Retired:
Tractor: Dark Khaki '06 CRD Sport, GDE ECO & Trans Tunes, 2.5" lift + 245/75r16. - Sold 27Apr16
Ghost: Silver '06 KJ CRD Limited, bunch of goodies done - Sold 18Apr16