Can anyone tell me if the rocker arms are aligned properly? I installed new rocker arm and used the guilde bolt to install the valve cover but i can't tell if the rocker arm are in the right place. When I turn the cam, it feels the same but the sounds is dififrent 3/4 times. Maybe it's just me but I don't want continue forward until I'm sure they're okay. I just don't want to have to pull it again.

https://youtu.be/PVUVLkTksOE

_________________
05 Liberty Sport CRD: Timing belt kit with water pump @ 98K, 2nd gen fuel head, 5V Bosch steel plugs, Exhaust/intake valves, oem thermostat, driver and passenger side engine mounts, head gasket, ARP head studs, CCV hose, Hayden fan clutch, Airbox Mod, Litens alternator pulley, Samco hose, Rocker arms, EGR delete winter start kit, GDE eco tune

Just started for the first time. Does it sound okay? I'm not used to diesel so can't tell what it sounded like prior. This is the first start after arp studs, rockers and timing belt.

https://youtu.be/yixujJaSedU

_________________
05 Liberty Sport CRD: Timing belt kit with water pump @ 98K, 2nd gen fuel head, 5V Bosch steel plugs, Exhaust/intake valves, oem thermostat, driver and passenger side engine mounts, head gasket, ARP head studs, CCV hose, Hayden fan clutch, Airbox Mod, Litens alternator pulley, Samco hose, Rocker arms, EGR delete winter start kit, GDE eco tune

Sound good.

_________________
2006 Liberty Limited CRD, Deep Beryl Green, Yeti tune, Arp studs, new cams, rockers, lifters, TB. "Green Monster"
2005 Liberty Sport CRD, Deep Beryl Green, GDE Hot Tune, ARP studs. "Rocket"
1982 Fiat 124 Spider Convertible. "Fiona"

Sounds fine - Put the intake elbow kit on, and it will sound super smooth.

_________________
Proud supporting vendor of LOST Jeeps
TRAVELING CRD TECH. I come to you!
Need help? Just ask! I've taken it apart more than most.
Email jeep [at] maincomputer [dot] com - BOARD MESSAGING IS BROKEN
Over 225 CRDs currently driving with my valves, timing belt, rockers, or ARP Studs.
Bad noises = REALLY bad things.

Thanks guys. I am going to start putting the serpentine belt tomorrow. I will post detail of my experience and picture of this when it's all complete.

_________________
05 Liberty Sport CRD: Timing belt kit with water pump @ 98K, 2nd gen fuel head, 5V Bosch steel plugs, Exhaust/intake valves, oem thermostat, driver and passenger side engine mounts, head gasket, ARP head studs, CCV hose, Hayden fan clutch, Airbox Mod, Litens alternator pulley, Samco hose, Rocker arms, EGR delete winter start kit, GDE eco tune