It is currently Thu Mar 28, 2024 11:51 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 115 posts ]  Go to page 1, 2, 3, 4, 5, 6  Next
Author Message
 Post subject: BUMPERS THREAD - PLEASE READ BEFORE POSTING
PostPosted: Sat May 12, 2007 4:17 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jul 01, 2006 9:19 pm
Posts: 4128
Location: Saint Augustine, FL
How about a sticky thread on bumpers. One thread showing all the options on bumper would save a lot of searching when we have a lousy search function.

Terry

If you have any info on a custom bumper (including modifications to your existing aftermarket bumper) or other bumper available to the public, please post info on it. As a favor to those searching this thread will be cleaned of any "fluff" posts and only the informational posts will remain to make it easier to sift through for information. Thanxs!

_________________
Image2011 Ford F-150 XLT 4X4


Top
 Profile  
 
 Post subject: ***AFTERMARKET/ CUSTOM BUMPERS***
PostPosted: Wed Jun 06, 2007 12:05 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Mon May 22, 2006 6:28 pm
Posts: 3880
Location: Wichita/ Pittsburg, Kansas
Budget front bumper!!- pyrolife2000
http://www.lostjeeps.com/forum/phpBB3/vie ... 853#474853

KK Custom Steel Bumper-Boblemoche
http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=38886

Warn JK Front Bumper Customized KK-Liberty Jack
http://www.lostjeeps.com/forum/phpBB3/vie ... &start=100

New Bumper -DoverKJ
http://www.jeepkj.com/forum/showthread.php?t=36958

SC Rockstar Front Bumper: '02-'04 KJs- Troysterr
http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=27967

SC ROCKSTAR 05'-07'-JHCRASH
http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=26932
If interested in this bumper please read the following concerning the SC Rockstar:
http://www.lostjeeps.com/forum/phpBB3/vie ... sc&start=0
http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=39710
http://www.lostjeeps.com/forum/phpBB3/vie ... sc&start=0
http://www.lostjeeps.com/forum/phpBB3/vie ... sc&start=0

SC ROCKSTAR 05'-07' with WINCH-FULLTIMER
http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=39245

Rock Lizard Monitor Lizard Front Bumper (still under development)-USAFCOP
http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=7857

Rock Monitor Convertible Winch Front Bumper Teaser-Rock Lizard
http://www.lostjeeps.com/forum/phpBB3/vie ... highlight=

Rock Lizard Rear Heavy Duty bumper-Tokyojoe
http://www.lostjeeps.com/forum/phpBB3/vie ... ght=bumper

Rock Lizard Rear Light Duty bumper
http://www.rocklizardfabrications.com/L ... bumper.htm

Joey's Front Bumper Fabrication- jsc7002
http://www.lostjeeps.com/forum/phpBB3/vie ... p?t=257342

Custom Bumper/Hitch/Brushguard/Hitch Winch / Hi Lift Jack-kjhawaii
http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=10527

Diamond plating on Front Bumper-RespectMyLibertay
http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=3688

New Tube bumper-AZScout
http://www.lostjeeps.com/forum/phpBB3/vie ... ght=bumper
(now owned by KJ119 with winch and plating)
http://www.lostjeeps.com/forum/phpBB3/vie ... highlight=

Winch Bumper Progress-CRDburnouts
http://www.lostjeeps.com/forum/phpBB3/vie ... ght=bumper

Pre-Runner Style Bumper - Take Two-orm
http://www.lostjeeps.com/forum/phpBB3/vie ... pre+runner

Winch Bumper Progress PICS!!!- CRDburnouts
http://www.lostjeeps.com/forum/phpBB3/vie ... ght=bumper

New KJ Bumper, now with running lights- lilmatty
http://www.lostjeeps.com/forum/phpBB3/vie ... ght=bumper

KJ Bumpers - A look at four- Tokyojoe
http://www.lostjeeps.com/forum/phpBB3/vie ... sc&start=0

TJM Bumper Install- spencevans
http://www.lostjeeps.com/forum/phpBB3/vie ... 199#199199

New Bumper For KJ's....Front And Rear-jsc7002
http://www.lostjeeps.com/forum/phpBB3/vie ... ght=bumper

Fabtech TJ Prerunner Front Bumper Customized KJ-Inc
http://rides.webshots.com/photo/2074830 ... 4751OsGakN

Rear Bumper with Swing Away Tire Carrier and Hi Lift-Inc
http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=41113

Custom Front Winch Bumper-Rescu2000
http://www.lostjeeps.com/forum/phpBB3/vie ... sc&start=0

TJM Bullbars (discontinued for the 05 to 07 models)
http://www.tjmbullbars.com/

ARB
http://www.arbusa.com/bull_bars_bumpers.php

Rock Lizard Fabrications
http://www.rocklizardfabrications.com/jeep_liberty.htm

TrailReady
http://www.trailready.com/jeep_liberty.html

http://www.lostjeeps.com/forum/phpBB3/vie ... highlight=


Last edited by jsc7002 on Thu Jun 04, 2009 1:43 am, edited 5 times in total.

Top
 Profile  
 
 Post subject:
PostPosted: Wed Jun 06, 2007 12:44 pm 
Offline
LOST Junkie
User avatar

Joined: Thu Sep 08, 2005 7:41 pm
Posts: 714
Location: Utah "Logan"
Hey we missed the TJM front Bumper. These are a great winch bumper. OZLTD also runs this front bumper. Construction quality and price is almost identical to the ARB. Currently these bumpers can be purchased from any TJM dealer.



http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?p=199199#199199

http://www.tjm.com.au/

http://www.tjmbullbars.com/

Image


Image

_________________
2005 CRD , Moab Rims, 245/75/16 Goodyear M/T
RL rear bumper, TMJ Front bumper, Frankenlinft,
*TOTALED*

1985 Mitsubishi Pickup SP 2.3 Turbo Diesel Watercooled turbo,4D56 ported head,
12" Suspension Lift with JK Rubicon axles, Elockers, 5.13's, Fox coilovers, Atlas 5.0, Rock Lizard supersliders

1996 Lexus LX450 -locked and lifted-


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jun 07, 2007 11:43 am 
Offline
LOST Junkie
User avatar

Joined: Thu Sep 08, 2005 7:41 pm
Posts: 714
Location: Utah "Logan"
Yeah I need to put a winch and mount some IPF lights like OZLTD did to break it up. It looks better in person than in the pic. I also hear the camera adds 10 inches.

Here are a couple of pics of the rear bumper like you requested Fulltimer. The rear bumper is a Marty special.

Image

Image

_________________
2005 CRD , Moab Rims, 245/75/16 Goodyear M/T
RL rear bumper, TMJ Front bumper, Frankenlinft,
*TOTALED*

1985 Mitsubishi Pickup SP 2.3 Turbo Diesel Watercooled turbo,4D56 ported head,
12" Suspension Lift with JK Rubicon axles, Elockers, 5.13's, Fox coilovers, Atlas 5.0, Rock Lizard supersliders

1996 Lexus LX450 -locked and lifted-


Top
 Profile  
 
 Post subject: From Trailready:
PostPosted: Tue Jul 17, 2007 10:29 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Dec 30, 2005 10:26 pm
Posts: 2133
Location: Sin City USA
We have a front and rear bumper available for the 2006 Jeep Liberty. The front bumper comes as a base model (for $999) or with a Grill guard (for $1149). The rear bumper costs $899, whether you get it as just the base model or with light guards.
All bumpers come with a low-gloss, low-texture black powdercoat and D-ring shackle mounts. The front bumper also comes with light bezels to fit any after market light 4.5” or smaller.



Please let me know if you have any further questions, and thank you for your interest in Trailready products.
Have a good day,



Heather Brummer

Sales Support

Trailready Products, LLC
12410 Beverly Park Rd, Ste A
Lynnwood, WA 98087

425-353-6776 x19

_________________
2016 JKU RUBICON

other mods coming soon...


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 23, 2007 4:31 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 04, 2005 8:37 pm
Posts: 7928
Location: Big Bear & Lancaster, Ca.
My bumper was made by All J products. They made 4 or 5 of them and I own 2 of those. I have more pics, just need to dig them out of whichever card they are on and post them up. I will try to do that tonight.

BTW, They do not make them and will not make them any more unless you want to drop your KJ and a pile of money off up in Big Bear, Cali.

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal


Top
 Profile  
 
 Post subject: Bumper up-grade.
PostPosted: Mon Jul 30, 2007 4:37 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed Jul 25, 2007 4:26 pm
Posts: 50
Location: Kingsville, Tx
Image
Image

_________________
Sun, Sand, Surf, Freedom and LIBERTY!! Who can ask for more??

'02 Limited 4x4 (since 07/01)
Rene light bar
ARB Bumper
Warn XD9000
Hella Comet 500 lights
255/70R16 Rusty's 2.5" coil lift
Al's arms
2" receiver
Surco rack


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 30, 2007 6:25 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 04, 2005 8:37 pm
Posts: 7928
Location: Big Bear & Lancaster, Ca.
Image
Image
Image
Image
Image
Image
Image

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal


Top
 Profile  
 
 Post subject:
PostPosted: Sun Sep 23, 2007 10:47 am 
Offline
LOST Junkie
User avatar

Joined: Fri Mar 03, 2006 2:38 pm
Posts: 801
Location: Tuscaloosa, AL
Image

_________________
2005 CRD Sport
Mods: Glasspack, OME HD Struts & Springs, 2" Daystar lift,
255/70/16 General Grabber AT2's on MOAB's
ORM&EHM with great success!
TJM T17 Bumper, 50W KC HID's
Image


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 25, 2007 7:41 pm 
Offline
LOST Member

Joined: Mon Aug 27, 2007 12:41 pm
Posts: 208
Location: Michigan Lansing
heres mine I just finished.
Image
Image

Chris

_________________
2002 Liberty, 3.7L auto, Franky


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 25, 2007 8:10 pm 
Offline
LOST Member

Joined: Mon Aug 27, 2007 12:41 pm
Posts: 208
Location: Michigan Lansing
Bedliner, the shell is 3/16 steel. Two 1/4 thick 2 inch square stock off the frames to the hitch. welded a plate with the nuts into the "frame" so it would bolt up from below. gussets and a little bit of angle reinforcing it on the back. Used 6 total bolts, .5" X 4", grade 8 to mount it. Weighs 70 pounds.

Chris

_________________
2002 Liberty, 3.7L auto, Franky


Top
 Profile  
 
 Post subject:
PostPosted: Wed Sep 26, 2007 4:59 pm 
Offline
LOST Member

Joined: Sat Nov 18, 2006 2:19 pm
Posts: 136
Location: Vail Valley
Here's mine...
http://rides.webshots.com/photo/2072468800040947145FYTWic?vhost=rides
Image
Image
Image
Image
Image

_________________
Black '06 CRD: 2.5" OME lift, Aero Turbine Exhaust, Warn m8000 on custom bumper. NEW Falken Ziex S/TZ04 245/75/16's Scored a smokin' deal @ http://www.tirezoneusa.com

OD '48 Willys CJ2a: fresh motor, new wiring harness, stainless exhaust, bestop, 34" TSLs and about 200 hours into the thing, possibly FOR SALE


Top
 Profile  
 
 Post subject:
PostPosted: Fri Oct 05, 2007 1:42 am 
Offline
LOST Newbie
User avatar

Joined: Wed Aug 08, 2007 1:05 am
Posts: 27
does anyone have the link to the post where a guy cut his stock bumper up until about the tow hook level?

_________________
http://www.cardomain.com/ride/2836537
http://jeepkj2005.blogspot.com

Check this art out
http://www.pasefika.com


Top
 Profile  
 
 Post subject:
PostPosted: Fri Oct 05, 2007 1:59 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jun 09, 2006 2:30 pm
Posts: 2519
Location: LOST in Wisconsin
That was me

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=22461&highlight=

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 21, 2007 2:33 am 
Offline
LOST Junkie
User avatar

Joined: Mon Mar 26, 2007 6:21 pm
Posts: 970
Location: Somewhere in Australia - or not, as the case may be.
The TJM bar is also available in aluminium.

Image

_________________
November 2006 2.8 CRD manual, CRDSTU front springs, King HD rears, Polyairs, LT245/70R16 Pirelli Scorpion ATRs, DP chip, Airflow snorkel
TJM alloy front bar, Ox 9500lb winch, Hella Compact 4000 spots, Complete set Mopar skid plates, Mopar cargo barrier
GME TX3440 UHF, Codan NGT HF


Top
 Profile  
 
 Post subject:
PostPosted: Tue Feb 26, 2008 2:54 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jan 06, 2007 1:54 am
Posts: 5827
Location: 7,000 feet, Zuni Mountains, New Mexico
Image

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 29, 2008 4:25 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Oct 25, 2005 6:57 pm
Posts: 154
Location: Belmont, CA
Haven't washed her yet, but here's a field photo:
Image

_________________
Liberating. 2006 KJ Sport, Pearl blue, lic. plate CACHE EH. Mods: Frankenlift, Boulderbars, Superskid, Rockstar bumper, PS rock ring, ARB rear locker, BS Dueler Revo LT245 10-ply.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jun 07, 2008 8:55 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 04, 2005 8:37 pm
Posts: 7928
Location: Big Bear & Lancaster, Ca.
Guess this is the best place for bumper mod pics.....
I had a winch laying around wanting a place to sit and since I have more front end clearance now, figured it was time for a change...

Started w/ this:
Image

Bought a universal winch mount from Harbor freight and modded it to work, cut, chop, grind....
Image
Image
Image
Image
Image

I'll be boxing in the gaps and openings once it is burned in to the back of the bumper and adding an angled section down to the bottom of the bumper and filling in the sides. Probably add a bull bar over the top maybe tabs for lights......maybe.....we'll see how it develops. More to come...

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jul 03, 2008 1:28 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Oct 25, 2005 6:57 pm
Posts: 154
Location: Belmont, CA
Elev 9500, above the Marines MWTC at Sonora Pass
Image
I'm embarrassed to say, it was a month before I noticed there is a receiver under the license plate. Guess I should investigate winch receiver mounts.

_________________
Liberating. 2006 KJ Sport, Pearl blue, lic. plate CACHE EH. Mods: Frankenlift, Boulderbars, Superskid, Rockstar bumper, PS rock ring, ARB rear locker, BS Dueler Revo LT245 10-ply.


Top
 Profile  
 
 Post subject: UPDATE
PostPosted: Tue Jul 08, 2008 1:40 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 04, 2005 8:37 pm
Posts: 7928
Location: Big Bear & Lancaster, Ca.
Boxed in the sides and cut a plate for the lower portion, angled from just under the leading edge of the winch plate back down to lower edge of bumper. Started to weld it up and welder started acting stupid. I think it might be dying on me...... Guess I will have to find someone to finish welding it up since a new welder isn't in the budget right now......UGH! I'll try to get some progress pics.

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 115 posts ]  Go to page 1, 2, 3, 4, 5, 6  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com