(NEW) LIFT Install April 25 NEW TIME 12 Noon

VoodooMann · **Posted:** Mon Apr 20, 2009 11:20 pm

tommudd wrote:

VoodooMann wrote:

OO OO i forgot,

Anyone wanna help me cut my front bumper, eve rsince day one, that air dam has been destined to GO!

what will i need, tools, materials, etc.

masking tape, sharpe knife/ or something to cut with ( dremel maybe) , easy way to do it is to heat up the bumper a little and cuts like butter

well, I've got plenty of sharp instruments, but no heat gun/torch etc.

03CDKJ · **Posted:** Mon Apr 20, 2009 11:22 pm

Boiler wrote:

Ha!. Borders be damned, I've probably got a shorter drive than half of you.

Yep... You should definately come! I'd probably leave your rack at home though! :twisted:

Unless.....

NEVERMIND.... You should bring it!!! :twisted:

tommudd · **Posted:** Mon Apr 20, 2009 11:24 pm

JUST TO SPOIL EVERYONES FUN

1) Just remember that no matter how many people are around, there is only so much that can be done in one day. We have tried it up here and ended up at 2 in the morning trying to finish up.

2) Also you need one person to do a final check on everything, that way no matter who worked on what, there is that final check to make sure things are tight and back together right.

3) If you don't know how to do something ask questions, jump in and learn, don't be afraid, next time you maybe the one getting lifted etc.

Tom

Diggerfreek · **Posted:** Mon Apr 20, 2009 11:25 pm

Hey Boiler, drop me a pm when you get a chance. I want to pick your brain a little

tommudd · **Posted:** Mon Apr 20, 2009 11:27 pm

VoodooMann wrote:

tommudd wrote:

VoodooMann wrote:

OO OO i forgot,

Anyone wanna help me cut my front bumper, eve rsince day one, that air dam has been destined to GO!

what will i need, tools, materials, etc.

masking tape, sharpe knife/ or something to cut with ( dremel maybe) , easy way to do it is to heat up the bumper a little and cuts like butter

well, I've got plenty of sharp instruments, but no heat gun/torch etc.

can we trim the rear bumper as well? I keep wanting to "trim " mine some for a different look :twisted:

Diggerfreek · **Posted:** Mon Apr 20, 2009 11:30 pm

tommudd wrote:

VoodooMann wrote:

tommudd wrote:

VoodooMann wrote:

OO OO i forgot,

Anyone wanna help me cut my front bumper, eve rsince day one, that air dam has been destined to GO!

what will i need, tools, materials, etc.

masking tape, sharpe knife/ or something to cut with ( dremel maybe) , easy way to do it is to heat up the bumper a little and cuts like butter

well, I've got plenty of sharp instruments, but no heat gun/torch etc.

can we trim the rear bumper as well? I keep wanting to "trim " mine some for a different look :twisted:

I thought yours came trimmed already since it was a custom built KJ from the factory???? :twisted:

03CDKJ · **Posted:** Mon Apr 20, 2009 11:32 pm

tommudd wrote:

JUST TO SPOIL EVERYONES FUN

1) Just remember that no matter how many people are around, there is only so much that can be done in one day. We have tried it up here and ended up at 2 in the morning trying to finish up.

2) Also you need one person to do a final check on everything, that way no matter who worked on what, there is that final check to make sure things are tight and back together right.

3) If you don't know how to do something ask questions, jump in and learn, don't be afraid, next time you maybe the one getting lifted etc.

Tom

X2

Plus we have to do a group picture at the shell station.... Well not all of us do... probably just the COOL guys! :twisted:

Diggerfreek · **Posted:** Mon Apr 20, 2009 11:35 pm

cdiekhans wrote:

tommudd wrote:

JUST TO SPOIL EVERYONES FUN

1) Just remember that no matter how many people are around, there is only so much that can be done in one day. We have tried it up here and ended up at 2 in the morning trying to finish up.

2) Also you need one person to do a final check on everything, that way no matter who worked on what, there is that final check to make sure things are tight and back together right.

3) If you don't know how to do something ask questions, jump in and learn, don't be afraid, next time you maybe the one getting lifted etc.

Tom

X2

Plus we have to do a group picture at the shell station.... Well not all of us do... probably just the COOL guys!

Guess that leaves you out :twisted:

tommudd · **Posted:** Mon Apr 20, 2009 11:36 pm

Diggerfreek wrote:

I thought yours came trimmed already since it was a custom built KJ from the factory???? :twisted:

AH HA!! it did come custom but you know never satisfied, always want more!

tommudd · **Posted:** Mon Apr 20, 2009 11:38 pm

Diggerfreek wrote:

cdiekhans wrote:

tommudd wrote:

JUST TO SPOIL EVERYONES FUN

1) Just remember that no matter how many people are around, there is only so much that can be done in one day. We have tried it up here and ended up at 2 in the morning trying to finish up.

2) Also you need one person to do a final check on everything, that way no matter who worked on what, there is that final check to make sure things are tight and back together right.

3) If you don't know how to do something ask questions, jump in and learn, don't be afraid, next time you maybe the one getting lifted etc.

Tom

X2

Plus we have to do a group picture at the shell station.... Well not all of us do... probably just the COOL guys!

Guess that leaves you out :twisted:

Hes the picture taker you know so he wants all the cool Jeeps there, not his of course but he trys

03CDKJ · **Posted:** Mon Apr 20, 2009 11:39 pm

Diggerfreek wrote:

cdiekhans wrote:

tommudd wrote:

JUST TO SPOIL EVERYONES FUN

1) Just remember that no matter how many people are around, there is only so much that can be done in one day. We have tried it up here and ended up at 2 in the morning trying to finish up.

2) Also you need one person to do a final check on everything, that way no matter who worked on what, there is that final check to make sure things are tight and back together right.

3) If you don't know how to do something ask questions, jump in and learn, don't be afraid, next time you maybe the one getting lifted etc.

Tom

X2

Plus we have to do a group picture at the shell station.... Well not all of us do... probably just the COOL guys!

Guess that leaves you out :twisted:

Leave the #1.5 KJ in OHIO out!!!! Might as well take it at a BP station and send it in for the contest! :wink:

Diggerfreek · **Posted:** Mon Apr 20, 2009 11:39 pm

Oh I see, so he's a SPECIAL case :roll:

VoodooMann · **Posted:** Mon Apr 20, 2009 11:39 pm

Trimmed how so?

might be possible. :twisted:

we can mock it up and see if we can get something that will look good.

any ways in particular/shape you were thinking about?

teckman02 · **Posted:** Mon Apr 20, 2009 11:42 pm

hey does anyone that is coming have a welder i have a rack that i have been building for the paat few months and want to maybe get it done at some point

Diggerfreek · **Posted:** Mon Apr 20, 2009 11:44 pm

cdiekhans wrote:

Diggerfreek wrote:

cdiekhans wrote:

tommudd wrote:

JUST TO SPOIL EVERYONES FUN

1) Just remember that no matter how many people are around, there is only so much that can be done in one day. We have tried it up here and ended up at 2 in the morning trying to finish up.

2) Also you need one person to do a final check on everything, that way no matter who worked on what, there is that final check to make sure things are tight and back together right.

3) If you don't know how to do something ask questions, jump in and learn, don't be afraid, next time you maybe the one getting lifted etc.

Tom

X2

Plus we have to do a group picture at the shell station.... Well not all of us do... probably just the COOL guys!

Guess that leaves you out :twisted:

Leave the #1.5 KJ in OHIO out!!!! Might as well take it at a BP station and send it in for the contest! :wink:

So is the grand prize a new KK :lol:

03CDKJ · **Posted:** Mon Apr 20, 2009 11:45 pm

if it is.... Tom and I are going to take turns smashing it with our bumpers!

tommudd · **Posted:** Mon Apr 20, 2009 11:48 pm

cdiekhans wrote:

if it is.... Tom and I are going to take turns smashing it with our bumpers!

No if it is, I am selling my KJ and doing a SFA on the KK with a different headlight arrangement :lol:

Boiler · **Posted:** Tue Apr 21, 2009 3:21 pm

PM sent Digger.

TAHOE · **Posted:** Tue Apr 21, 2009 5:54 pm

teckman02 wrote:

hey does anyone that is coming have a welder i have a rack that i have been building for the paat few months and want to maybe get it done at some point

Mine is a 220 stick welder. You're welcome to come fdown and use it if you want sometime.....after I put on a new plug end that caught fire last weekend :roll:

Diggerfreek · **Posted:** Tue Apr 21, 2009 5:59 pm

Boiler wrote:

PM sent Digger.

Thanks

(NEW) LIFT Install April 25 NEW TIME 12 Noon

Who is online