valoflyby wrote:
Thanks, guys, for confirming the "lights blink" issue. As the driver, I'd see it only occasionally, and when I'd say "did you see that" to the passenger, she'd always say "see what?".
Wasn't as bad as my wife's Cadillac CTS which would kill the dashboard lights for a second or two as you were cruising along. No rhyme or reason. (Or engage the Stabilitrac and try to take you into the median while going 55mph down the highway).
geordi wrote:
I would be HAPPY to have a REAL TPMS system with numbers... But I can't figure out how to get that function activated in my Limited CRD, so it displays on the EVIC. (I did upgrade the EVIC to the one that supports that feature - It displayed the first time it booted, and never again)
I have the pressures shown on the EVIC. It was my understanding that you either got the "right" wiring harness from the factory, which had the receivers in the wheel wells, or you were SOL on the retrofit.
I'd agree with you, except I know I have the tire sensors (seen them) and I've also seen the system from the computer side with an AutoEnginuity scanner. AE very nicely doesn't support any of the functions I really need, and it doesn't seem to have the ability to read the exact pressure info... So I only can know the tire sensor serials and their error counts, among other useless info. But I can see far more than just what an idiot light would show, and from my checking back when I installed the EVIC, The part numbers for the sensors are the same. So we all SHOULD have the right stuff, its just not turned on.
When you first turn the key on, all the idiot lights should cycle so you know they work. The TPMS light is in the upper right-hand corner, yellow / orange and it looks like a saggy tire.
Edited to remove unrelated rant.