Hello all, proud owner here of an 06 CRD, 84k on the clock. So far having fun lugging around burning Kerosene. Trying to read through here and pick up on some basics, great site!

Howdy - Welcome to LOST
- check the CRDtech section for EHM or Provent. other stuff can wait a while.

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur

Thanks for posting back!

I saw an ORM, not an ERM, but I am not yet used to this new alphabet soup. I am thinking about getting an SEGR and cleaning the MAP Sensor, see where we go from there!

I was considering the mod to keep the ccv out of the intake next

How much smoke does your jeep blow under load? Mine is a bit sootier than expected.

Howdy Gerge. Welcome to the forum. Here's a thread that has all the EHM/ ORM/ EGR alphabet soup stuff broken down: viewtopic.php?f=5&t=50930

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

Thanks for the link. I have been doing a bit of reading around and I appreciate the help. I am planning on doing the EHM and am trying to get one of UFO's fancy eeelectronic boxes to disable the EGR. And clean my map sensor

Figure that will be good for a while. I don't want to spend a ton om money on it till I know how reliable it is, but I gotta say this little Jeep rocks.

Would love to get a suncoast Tc/Shift kit/cooling fan and make a ton of power, but heck I just spent money for floormats

I know that giving a Diesel a Good hard, fast run helps clean 'em out a bit so the soot doesn't build up too much, your CRDs PO probably didn't do it often/ever.

Running Bio helps too.

_________________
L.O.S.T.# AM091337
2006 Voodoo Edition
EVIC
Franken/Jacked
265/75 Duratracs
Skid Row Skids
RED LED Overheads and Footwells
Custom TJ Bumper
4x 100w Hellas on rack
Nokya Hi-Watt headlight bulbs
Blacked Stockers
Thrush Welded muffler
K&N Filter
Custom Boiler Rack

Soon:More Lights, ARB/Winch

Welcome to the forum.

_________________
2010 Liberty 4x4 Limited
Trailer Tow Group, Sunroof, Skid Plates

1999 Wrangler Sahara
2" Teraflex lift with flexarms, ARB air lockers Front/Rear, Skid Plates, BFG 31x10.50 ATKOs

Here's a good one...I was wondering about any mods previous owner might have done, vehicle history, etc. Thought gee it would be nice to talk to previous owner. I called the dealership that sold it to me and asked REAL NICE and they called prior owner to get his permission to give me his name and phone number. They said he was more than happy to "ramble about his Jeep for hours". Any way I got his number and called, left voicemail. Hope he has good news and doesn't carry on about torque converters and what not

Well I have had the Jeep for three days and I got my first check engine light...stopped at a local shop and they pulled the code for me: PO714....transmission temperature sensor intermittent....

Any thoughts?

Do you have any kind of warranty on it?

Also, you may want to try posting in the "CRD. . . Love that Torque" section, you may get some good response.

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

I bought it from a VW dealer, the only warranty is 30 days powertrain. I am workign with them, but i don't think I will get far

I posted up in the section you mentioned, and did get a good response, at least I now know where the sensor is located, which is comforting because I called both of our local jeep dealerships to price the sensor and they said it didn't exist.

G