Hi I recently purchased a Cherokee 06 CRD limited UK spec. I am enjoying the car 50,000 miles its running great. The problem is a noise from the torque convertor area, rattles most when in reverse. A check on the underside reveals nothing loose. I am convinced its the TC. Any ideas anyone. Thanks

Welcome

If it's the UK spec then you should have the good TC and isn't likely your problem. Most people describe TC issues as a shudder when shifting between gears.

Have u done any tranny work? How about your u joints?

_________________
06 CRD/samco's/GDE eco tune/fumoto/toyo H/T /brake controller/tow package

04 TJ/3" OME/1" MML/1"BBL/3/4" coil spacers up front/discos/Extended bump stops/adj. Rear track bar/hi-lift/ 33x10.5x15 toyo MT on steelies/Epi9000superwinch/nates front bumper/extended breathers/160amp alternator

Might be the famous motor mount failure.

_________________
SOLD 11/21/13 White '06 Jeep KJ CRD<--Way to much $ spent here
84 Ranger 2.2L Perkins (Eaton Supercharger build) http://north76.proboards.com/thread/884 ... sel-ranger
89 W250 5.9L Cummins
97 F350 7.3L PSD
00 Excursion 7.3L PSD
01 F350 5.9L Cummins
(Gassers: 66 Chevelle SS, 66 Buick Wagon, 72 Nova, 80 Trans Am, 89 Bronco II)

_________________
2006 Black Jeep Liberty CRD Limited
K&N, Samco Hoses, Michelin 245/70-16 LTX A/T2, Fumoto F-102, V-Force Muffler, Mopar, Hitch, Trailer Wiring, Skid Plates, Slush Mats, Rear Shelf, Predator Stage 1, Transgo, ORM & CodeReader, Facet 40109 Pump
"IT'S A DIESEL THING, YOU WOULDN'T UNDERSTAND"
Certified Services Auto & Truck Repair

JUST NOT SO
The later improved TC was dubbed the "Euro" TC here because it was developed for the later more powerfull RA425 VM engine that was sold in later Export CRD's.
Europe's 05 and 06 CRD's had the same R425 engine we got in the US and it came with the same TC the US ones did

_________________
Atlantic Blue 06 CRD Limited (his)
Joined by a 2000 XJ Classic (hers)

Engine mounts are probably bad. I had a host of weird sounds coming from that area, everything from a faint, odd grinding sound to a loose-change-like ratting: it was literally driving me crazy. When I swapped the two mounts and the transmission mounts, everything ceased. All in it was $350.

_________________
2006 CRD w/99,300 miles
F31 from a previous life
EHM @ 42K, ProVent @ 79K
GDE Eco Tune & TCM @ 46K
Engine mounts replaced @ 55k/93k, Timing Belt @ 90k
Lift Pump @ 97k
OME Lift, 1.5''
Kenwood TM-V71 Ham Radio / Cobra C75WX CB
Surf Racks