DIY ECU Flash

rradavich · **Joined:** Sun Dec 22, 2013 12:56 pm **Posts:** 1

My Jeep is a 2005, I bought it in March in northern Illinois. I currently live in southern Mississippi and had service on the EGR while in Mississippi.

Itech · **Joined:** Mon May 30, 2011 4:41 pm **Posts:** 17

So did APC have a 526 or an 808?

I think I have a 526?

https://www.dropbox.com/s/o8a4c6z5tlvje ... 22015?dl=0

It had 7v OEM glow plugs in it. I also think it has had the F37 mod.

I just need EGR and FCV delete w/o CELs my inspection was due 12 days ago!

Help?

Itech · **Joined:** Mon May 30, 2011 4:41 pm **Posts:** 17

My first Mod!

Stock 526 w/ EGR CEL disabled ( this does NOT disable the EGR system, just the CEL).

https://www.dropbox.com/s/y5wd7vn2o1923 ... elete?dl=0

Now to disable the EGR / FCV and maybe add a bit of Yeti's Magic

Squeeto · **Posted:** Fri Sep 25, 2015 1:05 pm

rradavich wrote:

My Jeep is a 2005, I bought it in March in northern Illinois. I currently live in southern Mississippi and had service on the EGR while in Mississippi.

Rradavich = Radman01? (both with one post)

Did you try Yeti's suggestion?

Squeeto · **Posted:** Fri Sep 25, 2015 1:10 pm

Itech wrote:

I think I have a 526?

Yes

Itech wrote:

Now to disable the EGR / FCV ...

I will post it up when you have it.

rickey · **Joined:** Sat Oct 03, 2015 3:35 pm **Posts:** 1

i had try this bin Yeti's 808 EGR/FCV/DTC code delete + Mild tune (vers 1.02 but does nothing loads up but no start need help

vgpwr · **Posted:** Thu Oct 08, 2015 10:49 pm

Hi
first just verify if you have the good program
go to google and load a small software call (Bosch ECU nr . exe)
now check your original file to see if you have a 208 or 211 or something else

if you flash a wrong one, you will have to go on boot mode

Yeti · **Posted:** Fri Oct 09, 2015 5:10 pm

why you have load a 808 if you have 526 ? I hope you do not have lost your ECU

deltaspirit · **Joined:** Sun Oct 18, 2015 2:01 pm **Posts:** 2

First post

I picked up an 06 liberty recently locally here in Toronto, Ontario, Canada. Cleaned the sensors, changed the oils, did the ORM, elephant hose mod and went straight pipe, original 06 Torque converter AFAIK. When I first found this thread I went ahead and ordered the cable, got everything installed and it says my ecu is a 516. Seems there are no tunes for my ecu?

Jacques · **Joined:** Sat Oct 24, 2015 7:09 am **Posts:** 4

HI All. Just registered so I am a newbie. I have an 05 CRD that is in limp mode. I am pretty sure it is related to the P0610 DTC i have.

So, I thought a DIY reflash would be in order. My problem is my software shows up as 1037512031p_399430 in notepad.

I have not seen any reference to 031 tunes.
Is there one? Can I use one of the euro specced tunes as I am in South Africa?

Thanks for the thread and thanks in advance for any help.

Yeti · **Posted:** Sat Oct 24, 2015 1:57 pm

you must .........and every one must use the originale file , you can modify your file or use another tune but made in the same revison that you have , this topic is for example and study and some time help someone, the file posted is for study and you can take the difference from the mod file to understand how to , for deleting the DTc there is a BIG work from harstprogrammer in the early page , we are not responsible if some one want load a not proper tune and destroy his EcU .......and do not know why .

try to post your original file and we take a look

Jacques · **Joined:** Sat Oct 24, 2015 7:09 am **Posts:** 4

Hi Yeti....you are a legend!!!!

Here is my file.

https://drive.google.com/file/d/0B0OGOm ... w?ths=true

I do understand the importance of using the correct tune file for the correct software version I have.

Thank You

Yeti · **Posted:** Sun Oct 25, 2015 4:06 am

ask me the autorization

Yeti · **Posted:** Sun Oct 25, 2015 6:03 am

your file is similar at 809 file and the DTC table is the same , there is a little difference after the engine torque map

deltaspirit · **Joined:** Sun Oct 18, 2015 2:01 pm **Posts:** 2

deltaspirit wrote:

First post

I picked up an 06 liberty recently locally here in Toronto, Ontario, Canada. Cleaned the sensors, changed the oils, did the ORM, elephant hose mod and went straight pipe, original 06 Torque converter AFAIK. When I first found this thread I went ahead and ordered the cable, got everything installed and it says my ecu is a 516. Seems there are no tunes for my ecu?

If anyone can tell me from my bin file below which map I can use as an alternative that would be great

https://mega.nz/#!sxFmzAKJ!VUQ-YEk-bw-7 ... -HA3EAl9Ao

Any advice would be appreciated

Yeti · **Posted:** Sun Oct 25, 2015 3:36 pm

it's a 516 and you must use this revison and apply the mod file from another tune present in the list but not only copy , you must study a bit how to like many people here

Jacques · **Joined:** Sat Oct 24, 2015 7:09 am **Posts:** 4

Thanks Yeti. I have successfully removed the P0610 DTC with your help and hrastprogrammer's tables.

I still have no turbo. :furious:

She runs like a standard 2.8l diesel (no turbo power), no errors, all hoses and intercooler etc. checked, no leaks.

Any ideas? Anyone?

Cheers from SA

Yeti · **Posted:** Tue Oct 27, 2015 11:19 am

Jacques wrote:

Thanks Yeti. I have successfully removed the P0610 DTC with your help and hrastprogrammer's tables.

I still have no turbo. :furious:

She runs like a standard 2.8l diesel (no turbo power), no errors, all hoses and intercooler etc. checked, no leaks.

Any ideas? Anyone?

Cheers from SA

I have found this

viewtopic.php?f=5&t=38482

have you tried to clean the PCM connector?

Yeti · **Posted:** Tue Oct 27, 2015 1:09 pm

two address for P0610

E4299=17

E42E1=17

deeprecon1 · **Posted:** Tue Oct 27, 2015 4:24 pm

Hello fellow crd people.

So, im on travel trying to help another crd owner with his 2006 stage 2 weeks kit installed. The only file I could find to remove the cel was Hrastprogrammers ... Has anyone shared a mild stage 2 tune for the 513 ecu ?

I have installed Hrast tune just hoping to give his crd a little more power ......

DIY ECU Flash

Who is online