Quote:
letsroll
If one wheel has zero resistance (like one in the air) the true trac will not work. This is because it is a torque sensing set up and will transfer power to the wheel with less ristance but needs some for the bevel gear transfer to work. That is why you can apply a little brake and get it to work. They are a great device and have no cluthes to wear and I have had on inf the front of both of my wranglers and it works great.
Quote:
DarbyWalters
Actually the DTTs come with Torque Bias built in (2.5x to 3.5x) that will actually turn the opposite wheel with little or no traction on the other. You can manually 'aide' the device by applying brake, but you don't always have to. The drawback to applying the brake is that is goes to all four wheels whether you want it to or not. For the rear you can pull up the ebrake a bit to just apply pressure to the rear DTT. I had one in the front with 3.5x preset torque bias and I never had to use the brakes to get a wheel with traction to turn...just a little gas and the DTT would go to work.
I do some crazy rockcrawling with my KJ,with one front wheel in the air and the other just barely touching anything it will spin both tires,I just use the brakes to hold the "lock" better and have more control going up and over.Gotta keep that little extra control on the front wheel spin as not to explode the front diff running 32" tires on steel rims.The TT is awesome on slippery steep hill climbs,it grabs and paws it's way up while still being able to turn the front wheels L/R,unlike a full locker(ARB) can make turning the wheel difficult to next to impossible sometimes.I think both F/R TT's with ESP(even though I hate ESP

) would be a very tough contender offroad.