"Alak"
Quote:
I have a buddy who I used to wheel with in my KJ who drove a YJ. EVERY TIME, and this is fact. EVERY TIME he went out, something related to the clutch assembly malfunctioned. Everything was new (new transmission). First was the pressure plate. Then was the clutch springs in the clutch came out. Then the clutch fork bent, then the hydraulics failed. Throwout bearing went. These are all separate times out with new parts. It spends more time in the shop than on the trail.
When you have multiple problems like that - odds are overwhelming that something basic in the assembly is bad - most likely the centerlines of the engine/transmission are off - could be a the bell housing casting is off or a mount is broken - he needs to go back to basics and make sure everything is aligned and not moving.
Properly setup and driven - manuals should not have any more fails that an automatic - probably have to replace the clutch at 100K but that's about it.
autos - are very Dependant on how hot they get - overheat it and kill the clutches and it's rebuild time - and I've seen that happen at 100K also.
_________________
2005 CRD
stuffSkeptic quod gratis asseritur, gratis negatur