Does anyone else have this problem??? After my rear windshield wiper is turned off it doesn't return to the notched position. It goes to the right spot but it is on the outside of the little notched area and I have to physically move it there by hand each time. Is there a fix for this?

_________________
2005 Liberty Sport 4X2 V6 3.7L Stone White 100% Stock

It sounds like someone took off the arm and didn't put it back on in the same place. Take it off and rotate it to the left just a tiny bit. If that isn't enough do it again.

Terry

_________________
2011 Ford F-150 XLT 4X4

Yep I'd agree with that. But in the interest of comic relief, we're not talking about this kind of rear wiper, are we?



Sorry I just read another thread about greasing your rear end... It's one of those nights!

_________________
Black '05 KJ Sport

Oh sh*t!

Terry

_________________
2011 Ford F-150 XLT 4X4

Thanks Fulltimer, I'll try that fix. And KeswickDave, I don't think that will stay on the wiper arm would it? I know
it wouldn't clean the enitre back window good enough anyway.

_________________
2005 Liberty Sport 4X2 V6 3.7L Stone White 100% Stock

I did the re-index thing and this worked for me (so that the wiper actually makes contact with the glass) but the blade itself looks ancient!

When I looked at the adapter (2004 Jeep Liberty Limited) I did not notice that it looked that different (the plastic just started crumbling in my hands but I saved it). These are difficult blades to find but is it necessary to go to the dealer for a 2004 Limited? Can anyone confirm that?

_________________
Diana d
2004 Jeep Liberty Limited
My First Jeep -- I'm excited!!!!!

The blade wipers refills are easy enough to find, the whole blade I dunno-- I got new blades for the front from the dealer.

The rear wiper blade refills (snap to fit) that I used for the rear are:

Trico 47-700