It is currently Sun Nov 08, 2026 12:36 pm

View unanswered posts | View active topics


Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » General Discussions

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 2
  [ 22 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
VoodooMann
 Post subject: What do I do?
PostPosted: Tue Jan 19, 2010 5:29 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Mar 07, 2009 1:58 am
Posts: 820
Location: Ohio
I have 20-22 3ft sections of 3/4 metal tubing laying in my garage...


WHAT DO I DO WITH IT? :banghead:

_________________
L.O.S.T.# AM091337
2006 Voodoo Edition
EVIC
Franken/Jacked
265/75 Duratracs
Skid Row Skids
RED LED Overheads and Footwells
Custom TJ Bumper
4x 100w Hellas on rack
Nokya Hi-Watt headlight bulbs
Blacked Stockers
Thrush Welded muffler
K&N Filter
Custom Boiler Rack

Soon:More Lights, ARB/Winch
Top
 Profile  
 
STINGN
 Post subject: Re: What do I do?
PostPosted: Tue Jan 19, 2010 5:50 pm 
Offline
JACKRABBIT
JACKRABBIT

Joined: Sat Dec 13, 2008 4:26 pm
Posts: 3970
Location: Phoenix, AZ
make a brush guard for the bumper :)

_________________
Steve
2018 RAM 1500 Rebel
2003 KJ
Mods:Exterior: Frankenlift + 2 extra rear iso, JBA UCAs, ARB Bumper w/XRC8, Safari Snorkel, 265/75/16 AT, Mopar Skids, Boulderbars, RL Gecko Sport Rack
Interior: Infinity Reference speakers, 12" Alpine Type R Sub, Alpine radio, Gauge Pods (Oil, Volts), Cobra Cb, All J Interior Rack
Top
 Profile  
 
TexasRock
 Post subject: Re: What do I do?
PostPosted: Tue Jan 19, 2010 5:57 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun Jun 17, 2007 10:53 pm
Posts: 312
Location: San Angelo, Texas
Build me a pre-runner type light bar and I'll pay ya for it!
Top
 Profile  
 
Diggerfreek
 Post subject: Re: What do I do?
PostPosted: Tue Jan 19, 2010 6:07 pm 
Offline
LOST Addict
User avatar

Joined: Thu Sep 13, 2007 1:28 am
Posts: 10686
Location: Some where in Colorado
roof rack

_________________
2008 KK Liberty Sport NIGHT OPS EDITION + GILLS
OEM & Custom Skids - Factory Tow Package - Rock Lizard Skink Super Sliders
Prototype JBA 4 Inch Lift - JBA UCA's - Flowmaster Super 44 OR - Whacked Resonator
Jet Stage 2 - RL Gecko Basket Rack - Custom Winch Bumper - Recon 10.5K Winch
Image
Top
 Profile  
 
Budke
 Post subject: Re: What do I do?
PostPosted: Tue Jan 19, 2010 10:01 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jul 14, 2009 12:20 pm
Posts: 1881
Location: Orange Park, FL
Exocage. :grim:

_________________
'02 Jeep KJ 4x4- Gone
'92 YJ- lift, swampers, bumpers....yeah, its pretty sweet.
*DISCLAIMER*: I can not be held liable for anything I say on the forums or in real life.
I also can not be held liable for any jeep breakage or life problems caused due to my advice being taken. :D
Top
 Profile  
 
JeepinJarhead03
 Post subject: Re: What do I do?
PostPosted: Tue Jan 19, 2010 10:13 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun Feb 01, 2009 2:29 am
Posts: 5956
Location: Hillsborough, NC / Corolla NC
1. Yell through them

2. build gocart

3. let me borrow them

or you could do one of those dumb options the other guys mentioned :)

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632
Top
 Profile  
 
FreedomKJ
 Post subject: Re: What do I do?
PostPosted: Tue Jan 19, 2010 11:14 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Jul 07, 2005 8:48 pm
Posts: 861
Location: Aurora, CO
Create the often discussed, never implemented tube doors.

_________________
Jeremy - Aurora, CO
L.O.S.T. #0

Future:
2016 Hydro Blue JK Unlimited Rubicon Hard Rock

Previous:
2012 Flame Red JK Unlimited Rubicon - Sold!
2012 Flame Red JK Unlimited Rubicon - Dealer buyback
2003 Silver KJ Freedom 4x4 - Sold!
32s, Frankenlift, BBars, onboard air, dirt.
KJ EVIC Install
Top
 Profile  
 
VoodooMann
 Post subject: Re: What do I do?
PostPosted: Tue Jan 19, 2010 11:40 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Mar 07, 2009 1:58 am
Posts: 820
Location: Ohio
ahhh tube doors...

maybe a possibility, but it would not be rigid enough for any real use with this tubing I have, could make a mock up though...





a pre-runner bar for my bumper might work though. I'd need someone with a welder for that however.

_________________
L.O.S.T.# AM091337
2006 Voodoo Edition
EVIC
Franken/Jacked
265/75 Duratracs
Skid Row Skids
RED LED Overheads and Footwells
Custom TJ Bumper
4x 100w Hellas on rack
Nokya Hi-Watt headlight bulbs
Blacked Stockers
Thrush Welded muffler
K&N Filter
Custom Boiler Rack

Soon:More Lights, ARB/Winch
Top
 Profile  
 
Boiler
 Post subject: Re: What do I do?
PostPosted: Wed Jan 20, 2010 12:50 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jan 30, 2009 12:38 am
Posts: 1593
Location: Muncie Indiana
Lawn Furniture.

Seriously 3/4" diameter (or even square) is not a very stout cross section for structural items, even it if is thick. Even an 1/8 wall thickness for a lightbar will be a little flimsy.

Doors (LOL)

Exocage (forehead slap)

_________________
2005 KJ Renegade
Fabrications for sale: Aluminum Roof Rack (See Page 9)
Aluminum Gas Tank Skid -- Radiator Skid -- Front Strut Shims
Coming Soon: Rear Bumpers with lots of options
Top
 Profile  
 
VoodooMann
 Post subject: Re: What do I do?
PostPosted: Wed Jan 20, 2010 1:36 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Mar 07, 2009 1:58 am
Posts: 820
Location: Ohio
most of this stuff is thicker than 1/8", it was being used to hang rows of sledgehammers/axes/shovels. so it is pretty sturdy. I took a good hard baseball swing at an I-beam at work and barely dented it, so I'm pretty sure it is stable enough for a lightbar, especially if It is braced/built to look like a brush deflector. sort of like the one durangotang made.


about 4 pieces were being used to hold rakes/hoes, so it is the thin-walled stuff.

anyone in east ohio have a welder and a tube bender?

*edit* I believe it is 3/4" inner Dia.

_________________
L.O.S.T.# AM091337
2006 Voodoo Edition
EVIC
Franken/Jacked
265/75 Duratracs
Skid Row Skids
RED LED Overheads and Footwells
Custom TJ Bumper
4x 100w Hellas on rack
Nokya Hi-Watt headlight bulbs
Blacked Stockers
Thrush Welded muffler
K&N Filter
Custom Boiler Rack

Soon:More Lights, ARB/Winch
Top
 Profile  
 
Boiler
 Post subject: Re: What do I do?
PostPosted: Wed Jan 20, 2010 1:39 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jan 30, 2009 12:38 am
Posts: 1593
Location: Muncie Indiana
Ah, sounds like you have some 3/4" pipe, some schedule 40 and some 80.

_________________
2005 KJ Renegade
Fabrications for sale: Aluminum Roof Rack (See Page 9)
Aluminum Gas Tank Skid -- Radiator Skid -- Front Strut Shims
Coming Soon: Rear Bumpers with lots of options
Top
 Profile  
 
VoodooMann
 Post subject: Re: What do I do?
PostPosted: Wed Jan 20, 2010 1:39 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Mar 07, 2009 1:58 am
Posts: 820
Location: Ohio
I'm also not sure if it is galvanized steel or aluminum...

it has been in a non-climate-controlled area in a warehouse for 12+ years and i cant find any rust that wasnt from the screws holding it to the rack, at least as far as I've inspected so far.

*edit* it also might be Rigid Conduit

_________________
L.O.S.T.# AM091337
2006 Voodoo Edition
EVIC
Franken/Jacked
265/75 Duratracs
Skid Row Skids
RED LED Overheads and Footwells
Custom TJ Bumper
4x 100w Hellas on rack
Nokya Hi-Watt headlight bulbs
Blacked Stockers
Thrush Welded muffler
K&N Filter
Custom Boiler Rack

Soon:More Lights, ARB/Winch
Top
 Profile  
 
valvestem
 Post subject: Re: What do I do?
PostPosted: Wed Jan 20, 2010 7:18 pm 
Offline
LOST Member
User avatar

Joined: Thu Jul 07, 2005 7:01 pm
Posts: 222
Make blowguns out of them.
Top
 Profile  
 
TAHOE
 Post subject: Re: What do I do?
PostPosted: Wed Jan 20, 2010 8:05 pm 
Offline
LOST Addict
User avatar

Joined: Fri Aug 15, 2008 1:03 pm
Posts: 2164
Location: Cinci, Ohio
give it all to me then you won't rack your brain trying to make something :BANANA: :BANANA: :jester:

_________________
'99 Tahoe, 3" BL, 285/75/16's , MT II's.
'05 Liberty Sport, -wifey's
'98 Poncho Fireturd, 3.8L, .....the purple pig!
ImageImage
Top
 Profile  
 
Boiler
 Post subject: Re: What do I do?
PostPosted: Thu Jan 21, 2010 3:44 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jan 30, 2009 12:38 am
Posts: 1593
Location: Muncie Indiana
VoodooMann wrote:
I'm also not sure if it is galvanized steel or aluminum...



:shock:

If it is suprisingly light, its aluminum. It would weigh 1/3 that of steel, roughly. Almost like plastic.

_________________
2005 KJ Renegade
Fabrications for sale: Aluminum Roof Rack (See Page 9)
Aluminum Gas Tank Skid -- Radiator Skid -- Front Strut Shims
Coming Soon: Rear Bumpers with lots of options
Top
 Profile  
 
tommudd
 Post subject: Re: What do I do?
PostPosted: Thu Jan 21, 2010 4:02 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
I'm selling some parts this weekend so I have room for all of it up here. Don't worry I have a use for it :twisted:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited
Top
 Profile  
 
JeepinJarhead03
 Post subject: Re: What do I do?
PostPosted: Thu Jan 21, 2010 4:37 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun Feb 01, 2009 2:29 am
Posts: 5956
Location: Hillsborough, NC / Corolla NC
DIBS on.. umm

whatcha sellin?? :)

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632
Top
 Profile  
 
Budke
 Post subject: Re: What do I do?
PostPosted: Thu Jan 21, 2010 5:20 am 
Offline
LOST Addict
User avatar

Joined: Tue Jul 14, 2009 12:20 pm
Posts: 1881
Location: Orange Park, FL
sellin a lift!?!
Lightbar??
I'll take em!! :D

_________________
'02 Jeep KJ 4x4- Gone
'92 YJ- lift, swampers, bumpers....yeah, its pretty sweet.
*DISCLAIMER*: I can not be held liable for anything I say on the forums or in real life.
I also can not be held liable for any jeep breakage or life problems caused due to my advice being taken. :D
Top
 Profile  
 
W9JAB
 Post subject: Re: What do I do?
PostPosted: Thu Jan 21, 2010 9:14 am 
Offline
LOST Newbie
User avatar

Joined: Sun Jul 12, 2009 11:50 am
Posts: 54
A Pipe Organ would be cool :pepper: :BANANA: :pepper:
Top
 Profile  
 
LibertyFever
 Post subject: Re: What do I do?
PostPosted: Thu Jan 21, 2010 10:59 am 
Offline
LOST Junkie
User avatar

Joined: Mon Jan 01, 2007 11:41 am
Posts: 687
Location: Canada
buy a good pipe bender & a TIG then build something

_________________
my trail & highway ride (and occasional tow rig)
04 Liberty Sport with a 2.5" lift, ProComp 245/75R16 AT's and two Hella700FF lamps (more accessories to come)

my trail queen
95 YJ with a RE 4" lift, 33" ProComp Extreme's, M8000 Winch, Lockrite Locker up front, Super35 in the rear and 4.88 gears
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 22 posts ]  Go to page 1, 2  Next

Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » General Discussions

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com

Advertisements by Advertisement Management