So it's official!!! I have my jeep back with my new ARB bumper installed.
It looks great. I need to take picks and I will upload.

My questions is d-shackles.
The mounts for them on the bottom of the bumper are pretty thin and therefore the d-shackles I have flop around.
Anything out there like rubber isoloters or something to keep them steady?

_________________
-Jeep by Al's Upper A-Arms
-ARB Bumper
-IPF Aux lights
-Frankenlift 2 Premium (OME all four corners)
-General Grabber AT2
-All J Products Rock Rails
-Hidden Hitch W/D ring
-K&N Cold Air Intake
-Airade Throttle Body Spacer
-Flowmaster Delta 50 Muffler
-Jet Performance Stage 2 Chip
-3" striaght pipe off the muffler

*big washers,
**make a thick piece of rubber to slide in there
***leave em off till you actually need them

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Those are the exact conclusions I have been coming up with.
I was hoping there was one I was not thinking of.

_________________
-Jeep by Al's Upper A-Arms
-ARB Bumper
-IPF Aux lights
-Frankenlift 2 Premium (OME all four corners)
-General Grabber AT2
-All J Products Rock Rails
-Hidden Hitch W/D ring
-K&N Cold Air Intake
-Airade Throttle Body Spacer
-Flowmaster Delta 50 Muffler
-Jet Performance Stage 2 Chip
-3" striaght pipe off the muffler

I used rubber shock bushings on mine

_________________
2006 crd
Orm and ehm
Straight pipe and filter box mods
Ome lift with 31x10.50 tires and 15x10 wheels
Bedlined flares and rockers
Tj custom bumper mod
Scorpion diesel tuner

Shock bushings are a good idea.
Which brand did you use?

_________________
-Jeep by Al's Upper A-Arms
-ARB Bumper
-IPF Aux lights
-Frankenlift 2 Premium (OME all four corners)
-General Grabber AT2
-All J Products Rock Rails
-Hidden Hitch W/D ring
-K&N Cold Air Intake
-Airade Throttle Body Spacer
-Flowmaster Delta 50 Muffler
-Jet Performance Stage 2 Chip
-3" striaght pipe off the muffler

My ARB shackle tabs now hold my AntiRock,good thing I have a winch

This is what I do with mine. Has the advantage of not letting anyone swipe them, too.

_________________
2002 KJ (un)Limited 4x4: OME HD lift, ARB bullbar, Warn 4X flood lights, Skid Row tranny skid, Mopar engine, transfer case and fuel tank skids, Boulder Bars, 245/75/16 Goodyear Duratracs on Moab wheels.

Yes I have lost a couple or had them stolen, one time needed to use them and they were rusted on so now they stay with the strap under the back seat

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

I bought a dozen large grade 8 washers. I bought them after realizing how much noise the shackles made with nothing supporting them side to side. I made another trip to the store; they were in the bin right next to the bolts. Strangely though, six fit one shackle (three on either side), but I could only fit five washers on the other shackle. Both shackles are the same brand and rating but were purchased at different times...

_________________
Black '05 Renegade. Front suspension: Frankenlift, Moog HD LBJ's, Audiboy cut CV's
Rear suspension: OME 948's, 2 extra upper ISO's, Rancho RS 5000 shocks.
31X10.50X15 Duratrac's/ProComp 152's
ARB bumper, Mopar skids, JCR stage III's, Reese hitch with tractor lights, Champion shackle insert, "homebrew" on board air, 1000 watt inverter

I think they were old stock ones off a 90s model f250

_________________
2006 crd
Orm and ehm
Straight pipe and filter box mods
Ome lift with 31x10.50 tires and 15x10 wheels
Bedlined flares and rockers
Tj custom bumper mod
Scorpion diesel tuner