The part they don't want you to know about... Spicer #84270

bunkermonkeycw · **Posted:** Tue Jan 24, 2012 6:38 pm

D30A Intermediate shaft Spicer # 84270

Ray has got it for me in three weeks from now... but does it exist anywhere else? Pictures and descriptions elude every attempt... Napa thinks I'm crazy... am I? :5SHOTS:

tommudd · **Posted:** Tue Jan 24, 2012 7:23 pm

What are you trying to find one?
Thats why you buy ahead and stock pile :wink:

Do you need a picture of one or ????

Kasmir Jones · **Posted:** Tue Jan 24, 2012 7:42 pm

Mike try Amazon.com. jmark got his from there.

bunkermonkeycw · **Posted:** Tue Jan 24, 2012 7:57 pm

I need this vibration gone and the cv\inter shaft is on the list I haven't replaced. Gonna drive her till it breaks or I fix it. :JEEPIN:

bunkermonkeycw · **Posted:** Tue Jan 24, 2012 8:02 pm

Hermmm

http://www.amazon.com/Omix-Ada-16523-43-Axle-Shaft/dp/B0034KU8OQ/ref=sr_1_1?ie=UTF8&qid=1327449580&sr=8-1

Kasmir Jones · **Posted:** Tue Jan 24, 2012 8:08 pm

Jmarks was a spicer from Amazon.

tommudd · **Posted:** Tue Jan 24, 2012 8:26 pm

They've went up in price some since I bought two to stash away,
think they were 75 each :lol:

Get it quick if its making lots of noise, more than likely not much left I'll bet when you get it torn down.

02blue · **Posted:** Tue Jan 24, 2012 8:31 pm

Is this the same?

http://www.crownautomotive.net/product/ ... 057AB.html

bunkermonkeycw · **Posted:** Tue Jan 24, 2012 8:57 pm

02blue wrote:

Is this the same?

http://www.crownautomotive.net/product/ ... 057AB.html

I think so, and much less suspect in the picture

LOL

tommudd · **Posted:** Tue Jan 24, 2012 9:31 pm

Thats the picture of one for sure

02blue · **Posted:** Tue Jan 24, 2012 9:43 pm

Thanks. Think I'm about due for one.

Hydraulic Jack · **Posted:** Thu Jan 26, 2012 11:47 pm

I replaced all of my U joints and I still have a vibration that comes on between 45 and 55....Is this the part that is causing it? HJ

jmark · **Posted:** Fri Jan 27, 2012 12:46 am

the omix ada one on amazon is an actual dana/spicer one. apparently omix ada carries dana/spicer inventory.

jimymc · **Joined:** Thu Dec 17, 2009 7:51 pm **Posts:** 248

Hydraulic Jack wrote:

I replaced all of my U joints and I still have a vibration that comes on between 45 and 55....Is this the part that is causing it? HJ

Check for play or a torn boot on the front drive shaft on the CV joint where it meets the transfer case. I had a vibration at about the same speed and that was the culprit, a worn CV joint.

bunkermonkeycw · **Posted:** Tue Jan 31, 2012 7:06 pm

CV was rusted to the intermediate shaft and the C clip was mangled. Re-manned CV from NAPA and new C-Clip. (Splines were a bit worn but lock well in the new CV, new inter-shaft ordered anyway.)

Major vibrations are gone.

jimymc · **Joined:** Thu Dec 17, 2009 7:51 pm **Posts:** 248

Not a good idea to mate new splines to questionable intermediate shaft. The Jeep dealership did that to mine and ended up having to replace both the half axle and new intermediate shaft. The worn intermediate shaft ate the splines out of the CV. Best to replace them as a pair.

bunkermonkeycw · **Posted:** Thu Feb 02, 2012 12:40 am

Hopefully it will make it here soon.... Thanks jimy.

The part they don't want you to know about... Spicer #84270

Who is online