31s on stock kk

black_diesel · **Joined:** Fri Mar 09, 2012 8:51 pm **Posts:** 5

hey guys!...i have a kk and today i took my boyfriends 31x10.50 and put on my stock liberty with the stock tj rim and it did not scrub when i turned it left and right and then i took his 31x10.50 with his mickey thompson side biters on and it scrubbed when i turned left and right but its back spacing is like 3.5in. so im wandering if i would be ok with a 245/75/16 all terrain on a 4.25 backspace pro comp rim. I also ordered a 2in lift for it tonight.
[img][IMG]http://i1048.photobucket.com/albums/s363/423aarona/Facebook/Mobile%20Uploads/428644_337097349675881_100001268560188_1046758_361806079_n.jpg[/img][/img]

black_diesel · **Joined:** Fri Mar 09, 2012 8:51 pm **Posts:** 5

http://i1048.photobucket.com/albums/s363/423aarona/Facebook/Mobile%20Uploads/428644_337097349675881_100001268560188_1046758_361806079_n.jpg

black_diesel · **Joined:** Fri Mar 09, 2012 8:51 pm **Posts:** 5

http://i1048.photobucket.com/albums/s363/423aarona/Facebook/Mobile%20Uploads/424523_337100279675588_100001268560188_1046762_1677846272_n.jpg

black_diesel · **Joined:** Fri Mar 09, 2012 8:51 pm **Posts:** 5

Those pictures are with a 15in rim also. The 15in rim is very close to my brakes.

cgass · **Posted:** Fri Mar 09, 2012 9:49 pm

Looks like if you stuff the tires at all you'll tear up the wheel wells. You might get rubbing on the pinch weld in reverse too. Some of the guys have run 31s with an OME lift and they've still had rubbing issues. I can't imagine you wouldn't have any at stock height

black_diesel · **Joined:** Fri Mar 09, 2012 8:51 pm **Posts:** 5

I ordered a 2in lift tonight im goin to run a 245/75/16 which is a littlesmaller than his 31. Im wonderin if ill rubbing issues while turning with a 245/75/16 on a rim backspaced 4.25in. I had no fitment issue with the 31 on his stock tj rim other than my calliper the jeep turned fine with no rubbing. What im asking is if it would rub bad on 245/75/16's with a rim that will stick out alot more like a steel rim with backspacing of 4.25 and a 2 in lift

VegasDragger45 · **Posted:** Sat Mar 10, 2012 6:48 pm

Not sure if it will rub with those specs but I run BFG all terrains 245/75/16 with stock wheels and have no rubbing at all. It looks like if they stick out about an inch or so it should be ok with no rubbing.

musclezmarinara · **Posted:** Sun Mar 11, 2012 12:02 am

Looks awesome ! Great job what's your wheel setup ?

Musclez Marinara
Marco@acor4x4.com

Jeepin_it_real · **Posted:** Mon Mar 12, 2012 11:45 pm

all i will say is good luck... any trimming you dont do... those tires will... may fit under no compression but i bet when you make a sharp turn you will hear those tires bite

E2 · **Posted:** Tue Mar 13, 2012 9:15 am

Ohhh yeah they will bite in compression. Have fun we want to see some pics.

Lowridah313 · **Posted:** Sat Mar 17, 2012 9:54 am

Does anyone have pics of how close a 15" wheel is to the caliper? Like what type of clearance are we talking about?

Jeepin_it_real · **Posted:** Sat Mar 17, 2012 11:11 am

a lot of us have tested and tried... it's just too close... WAY WAY too risky to run a 15"

Lowridah313 · **Posted:** Sun Mar 18, 2012 8:50 pm

Jeepin_it_real wrote:

a lot of us have tested and tried... it's just too close... WAY WAY too risky to run a 15"

Not trying to be rude, but that doesn't tell me anything. I'm looking for facts, not personal opinions.

DirtyKK · **Posted:** Sun Mar 18, 2012 10:15 pm

15s will fit. not comfortably for some. just hope you dont bend a rim. see here...

viewtopic.php?f=88&t=43042&hilit=15x7&start=1960

Lowridah313 · **Posted:** Mon Mar 19, 2012 6:21 am

Thanks DirtyKK. Thats exactly what I was looking for!

31s on stock kk

Who is online