LOST JEEPS :: View topic - CRD LINKS to Fixes and LINKS/PICS for Mods

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

CRD LINKS to Fixes and LINKS/PICS for Mods http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=24935	Page 1 of 1

Author:	gmctd [ Mon Oct 01, 2007 7:29 pm ]
Post subject:	CRD LINKS to Fixes and LINKS/PICS for Mods
Ok - I got lots of time, so I wanna try something with the chief's post - gonna be doin' lots of editing, so please bear with me LOOKS GOOD TO ME>>>DW and I dressed it up a bit ***************************************************************************************** First things to look at for longevity and safety: [img] http://www.gulfcoastnews.com/images/Roa ... Engine.jpg[/img] ORM/SEGR...keeps down abrasive soot in the top end and perks it up a bit http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=22631 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=23033 And how it works................................................................. http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=26621 EHM or Provent...keeps dirty oily vapors from intake tract http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=22703 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=24720 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=20052 http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=8744 Unplug Heater at Fuel Filter Head (possible fire hazard)...other issues with this Fuel Filter Head are being worked on slowly...ie. Racor replacement, CAT Filter Mod, aux lift pump, cooler, ect. http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=24599 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=24616 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=22688 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=24450 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=23509 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=24502 Aux Lift Pump and return-fuel cooler............................. http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=23099 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=24527 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=23117 http://liberty.eurekaboy.com/ http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=17573 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=25537 DCJ Factory Lift Pump install............................................... http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=26385 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=23099 Air Box Mod from 2002 or so...top entry air flow keeps water out of the system better http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=21828 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=25220 Order Parts #2, #3, #5 Suncoast torque converter, Transgo shift kit and aux trans fluid cooler, while you are at it http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=16289 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=24517 http://www.suncoastconverters.com/Jeep/ ... ducts.html With Pics........................................................................... http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=25447 Installing guages to protect engine, transmission - EGT, Boost, Trans Temperature http://www.lostjeeps.com/forum/phpBB3/vie ... ght=guages http://www.lostjeeps.com/forum/phpBB3/vie ... ght=guages http://www.lostjeeps.com/forum/phpBB3/vie ... ght=guages http://www.lostjeeps.com/forum/phpBB3/vie ... ght=guages http://www.lostjeeps.com/forum/phpBB3/vie ... ght=guages ScanguageII.............................................................................................. http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=20153 Fumoto Oil Valve...so you don't strip the drain-hole threads in the aluminum pan, as many have http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=20111 http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=7377 Defective oem LBJ, and front suspension stuff http://www.lostjeeps.com/forum/phpBB3/vie ... highlight= FAQ's for the CRD - OldNavy http://www.lostjeeps.com/forum/phpBB3/vie ... ght=airbox Failure symptoms - AFC\FCV\TCV valve http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=21964 EGR valve CRD Emissions components http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=8744 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=22703 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=13215 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=22702 **************************************************** First thing to look in for official factory service information: (Note - right-click the desired FSM file, then left-click 'save target as...') http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=24600 First thing to look in for official factory part number breakdown with exploded drawings: (Note - right-click the desired SPM file, then left-click 'save target as...') http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=24600 Posted factory part numbers http://www.lostjeeps.com/forum/phpBB3/vie ... highlight= Bosch CP3 injection pump description (long) http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=25047 ************************************************** Things you "want" to do... Upgrade Skids for offroad and road debris...at least a tranny skid to protect oil filter and tranny pan http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=7377 LIFT to make it a better JEEP http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=23950 TIRES to make the lift worthwhile Aftermarket Exhaust to open up the flow http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=19397 InMotion Tuning to bring the performance of the CRD... http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=22252 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=24280 http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=11280 Husky Liners to protect the carpet from Mud, Snow, Water, Sode, the list goes on and on Skids...the ones you didn't do in the above ^ including StepSliders ****************************************** Things you shouldn't think about...it will hurt your head... Rock Lizzard Rear Bumper with Tire Carrier and possible Jerry Can holder ARB Front Bumper (or other maker) to hold more mods Winch for those OffRoad Moments (Synthetic rope and Aluminum Hause to save weight and up safety factor) POD and GUAGES to give you more information on EGT/TURBO BOOST and or Transmission Temps MOAB Wheels just look great on any KJ ROCK LIZZARD Roof Rails so you can put anything up there Als Upper Control Arms LIGHTS

Author:	gmctd [ Mon Oct 01, 2007 8:59 pm ]
Post subject:
Lookin' good with pics.............

Author:	0311_DoC [ Mon Oct 01, 2007 9:07 pm ]
Post subject:
I think the fact that you took the time to do all of that is KICK stupid.. but that is just my .02

Author:	T^2 [ Mon Oct 01, 2007 9:46 pm ]
Post subject:	New to CRD? What to do?
Pray...

Author:	bugnout [ Mon Oct 01, 2007 11:00 pm ]
Post subject:	Re: New to CRD? What to do?
T^2 wrote: Pray... That no one will try to take your CRD away

Author:	chrispitude [ Tue Oct 02, 2007 6:57 am ]
Post subject:
Excellent resource with all the links in one place. Nice job! - Chris

Author:	DarbyWalters [ Tue Oct 02, 2007 9:56 am ]
Post subject:
I was going to make this a "Sticky" but decided to repost it in the CRD Tech Forum to keep the clutter down in this section...

Author:	nursecosmo [ Tue Oct 02, 2007 11:06 am ]
Post subject:
Fantastic job, kudos to gmctd!!!!!

Author:	gmctd [ Tue Oct 02, 2007 1:34 pm ]
Post subject:
Kudos to DW - it's his Guide Index - thought it would help, so I just did the janitorial work.......................

Author:	DarbyWalters [ Tue Oct 02, 2007 1:39 pm ]
Post subject:
den eye + de pics 4 dose dat dont reed 2 gud

Author:	Pablo [ Tue Oct 02, 2007 11:25 pm ]
Post subject:
You might want to add a trany temp guage to your guage set. I know I would do that before the boost guage. The scanguage reads the MAP sensor but not the tranny temp or the EGT.

Author:	DarbyWalters [ Tue Oct 02, 2007 11:42 pm ]
Post subject:
I put that in the text but I figured two guages were enuff...lol...but there it is

Author:	Pablo [ Tue Oct 02, 2007 11:49 pm ]
Post subject:
DarbyWalters wrote: I put that in the text but I figured two guages were enuff...lol That whole reading thing throws me sometimes. But that guage sure does look pretty.

Author:	gmctd [ Sun Oct 07, 2007 10:39 am ]
Post subject:
BTT

Author:	tugdrivinj [ Thu Oct 11, 2007 1:41 pm ]
Post subject:
bump

Author:	DarbyWalters [ Thu Oct 11, 2007 2:36 pm ]
Post subject:
The updated version of this post is in the CRD TECH SECTION...

Author:	gmctd [ Fri Oct 12, 2007 1:46 pm ]
Post subject:
Feel free to deep-six this thread whenever you're ready, chief..........................

Author:	ATXKJ [ Fri Oct 12, 2007 2:47 pm ]
Post subject:
before you do - make sure to add the extra links (i.e. they're not the same anymore - I count 43 links here vs about 24 in the 'tech' section)

Author:	gmctd [ Fri Oct 12, 2007 3:12 pm ]
Post subject:
I've been expanding this copy with links - Darby's original is being expanded with graphics, which you don't see in this one

Author:	KenJennings [ Sat Oct 13, 2007 11:08 pm ]
Post subject:
I'm thinking that the first topic/message should be copied to a sticky post.

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/